HP Quanta LB6M配置LACP

By | 2018 年 1 月 21 日

连接LB6M后进入enable模式

configure//进入配置模式
interface 0/17-0/24//进入17端口与24端口配置(根据自己需求选择端口,最多8个)
addport 1/1//把端口加入port-channel 1/1
description 'LACP-10GSW-1N2'//设置这几个端口的描述
exit//退出刚才选择的端口
interface 1/1//选择port-channel 1/1
description 'LACP-10GSW-1N2'//设置这个port-channel的描述
no port-channel static//关闭静态汇聚(不关闭的话是静态汇聚,关闭后才是LACP)
exit//退出刚才选择的port-channel
port-channel name 1/1 LACP-10GSW-1N2//设置port-channel 1/1的名称
exit //退出配置模式
show port-channel 1/1 //显示这个port-channel状态
Local Interface................................ 1/1
Channel Name................................... LACP-10GSW-1N2
Link State..................................... Up
Admin Mode..................................... Enabled
Type........................................... Dynamic
Port-channel Min-links......................... 1
Load Balance Option............................ 3
(Src/Dest MAC, VLAN, EType, incoming port)

Mbr    Device/       Port      Port
Ports  Timeout       Speed     Active
------ ------------- --------- -------
0/17   actor/long    10G Full  False  
       partner/long  
0/18   actor/long    10G Full  False  
       partner/long  
0/19   actor/long    10G Full  False  
       partner/long  
0/20   actor/long    10G Full  False  
       partner/long  
0/21   actor/long    10G Full  True   
       partner/long  
0/22   actor/long    10G Full  True   
       partner/long  
0/23   actor/long    10G Full  True   
       partner/long  
0/24   actor/long    10G Full  True   
       partner/long

3 thoughts on “HP Quanta LB6M配置LACP

  1. Pingback: HP Quanta LB6M LACP配置VLAN – HITSword's Blog

发表评论

电子邮件地址不会被公开。 必填项已用*标注